Jiu Han Enterprise Co., Ltd.

9th
De Categorieën van het product (110)
Meer Categorieën Verzorger Categorieën
Info van het contact
  • Land/Gebied: Taiwan
  • Contactpersoon: Mr. Jason Wu
  • Tel.: 886-6-2602755-9
  • Fax: 886-6-2686564
Referentie & Aandeel:

Hoods

De Categorie van het product De Kappen van Enginc & de Demper van de Kap,Engines/n.e.s.,Motoronderdelen
De Methode van de verkoop De uitvoer,OEM/ODM
De Termijn van de betaling T/T
Minimum Orde De bestelwagen DE eenheid van DE Prijs
10 Stukken USD / Stuk
10 Stukken USD / Stuk
Referentie & Aandeel:

Detail van het product

product kenmerk:

  • Taiwan
  • 08/16/2018

Extra Info:

  • ** (cm)

De Specificaties van het product / Eigenschappen

The hood (US and Canada) or bonnet (most Commonwealth countries) is the hinged cover over the engine of motor vehicles that allows access to the engine compartment (or trunk on rear-engine and some mid-engine vehicles) for maintenance and repair. In British terminology, hood refers to a fabric cover over the passenger compartment of the car (known as the 'top' in the US). In many motor vehicles built in the 1930s and 1940s, the resemblance to an actual hood or bonnet is clear when open and viewed head-on; in modern vehicles it continues to serve the same purpose but no longer resembles a head covering.

On passenger cars, a hood may be held down by a concealed latch. It is designed to protect a car from thefts, damage and sudden hood opening on the road. Hood release system is common on the most of vehicles and usually consists of interior hood latch handle, hood release cable and hood latch assembly. The hood latch handle is usually located below the steering wheel, beside the driver's seat or set into the door frame. When a driver pulls a hood latch handle the hood panel pops up and allows access to the engine compartment. On race cars or cars with aftermarket hoods (that do not use the factory latch system) the hood may be held down by hood pins. A hood may sometimes contain a hood ornamenthood scooppower bulge, and/or wiper jets. Hoods are typically made out of steel, but aluminum is rapidly gaining popularity with auto companies. Aftermarket manufacturers may construct hoods out of fiberglasscarbon fiber, or dry carbon.

De Sleutelwoorden van de koper:
tyg, Truck Body Parts, fender, roof, door
Related Category Searches on ttnet.net: