Wuhan Unique Mechanical And Electrical Equipment Co., Ltd.

Huis > Producten>Test Equipments/n.e.s.>

Power Cable PD Defects Simulating Device

De Categorieën van het product (20)
Info van het contact
  • Land/Gebied: China (vasteland)
  • Provincie: Hubei
  • Stad: Wuhan
  • Contactpersoon: Mr. John Zou
  • Tel.: 86-27-82757025
  • Fax: 86-27-82757025
Referentie & Aandeel:

Power Cable PD Defects Simulating Device

De Categorie van het product Test Equipments/n.e.s.
De Methode van de verkoop De uitvoer,Vervaardiging,OEM/ODM
De Termijn van de betaling T/T
Minimum Orde De bestelwagen DE eenheid van DE Prijs
1 Reeks USD 100000 / Reeks
Referentie & Aandeel:

Detail van het product

product kenmerk:

  • Wuhan , Hubei , China (vasteland)
  • UN003
  • 07/22/2017

Extra Info:

  • ** (cm)

De Specificaties van het product / Eigenschappen

General information:
Simulate power cable internal insulation faults, it is suitable for power cable’s PD charged detection research, instrument assessment and teaching training
Good authenticity
The power cable is designed according to the real power cable to simulate all the structure and electrical characteristics of the power cable.
Fault simulation
The model can simulate the insulation defects caused by the damp of the insulation, the external force damage or insulation aging etc. of the power cable terminal, intermediate joint or body etc.
Multimodal type
It can simulate different voltage class, structures and lengths of cable faults.
Controllable discharge
A single or composite PD signal can be simulated and control the starting voltage, the extinction voltage and the discharge intensity of each discharge signal.
Detection diversity
It can provide a test platform for pulse current, ultra high frequency, ultrasonic, transient ground voltage and other technical tests.
Measurement transfer
Built in pulse current correlation coupling and calibration unit, can synchronously detect the PD level of the experimental device, and be used as the basis for the instrument evaluation.
Good stability
Each fault model can be reused and the fault characteristics are stable.
Built-in infrared video probe, it is easy to observe the internal state, capture the discharge video.
Easy operation
The occurrence and disappearance of all kinds of faults can be directly controlled outside the device.
Voltage class: 10~500kV;
PD level: <=1pC;
Adjust method: Manual/Automatic;
Coupling capacitance: 50pF;
Discharge simulation: Point discharge 10~1000pC, Suspension discharge 200~20000pC, Air-gap discharge 20~1500pC, Surface discharge 20~1500pC.
De Sleutelwoorden van de koper:
Power Cable, PD Defects, Simulating Device
Related Category Searches on ttnet.net: